Enable dhcp client on CISCO ASA firewall

If you want to receive IP address from DHCP server , Please use following configuration.

 

interface Vlan2

 nameif outside

 security-level 0

 ip address dhcp setroute

Please consider the environment before printing this e-mail Disclaimer: This  communication  is  for the exclusive use of the intended recipient(s) and  shall  not attach any liability on the originator or ITC Infotech India Ltd./its  Holding company/ its Subsidiaries/ its Group Companies. If you are the addressee, the contents of this e-mail are intended for your use only and it shall  not be forwarded to any third party, without first obtaining written authorization from the originator or ITC Infotech India Ltd./ its Holding company/its  Subsidiaries/ its Group Companies. It may contain information which is confidential and legally privileged and the same shall not be used or dealt with  by any  third  party  in  any manner whatsoever without the specific consent  of  ITC  Infotech India Ltd./ its Holding company/ its Subsidiaries/ its Group Companies.

Enabling syslog logging on Cisco Switches and routers

no logging console
logging buffered 64000
logging monitor informational
logging buffered informational
logging trap errors
logging source-interface xxxx
logging 10.20.207.105

Cisco ASA failover

Primary Firewall ---------------- failover
failover lan unit primary
failover lan interface failover Management0/0
 failover link failover Management0/0
failover interface ip failover 192.168.254.1 255.255.255.0 standby 192.168.254.2

Secondary Firewall ------------------ config t
no failover failover lan unit secondary
failover lan interface failover Management0/0 failover link failover Management0/0
 failover interface ip failover 192.168.254.1 255.255.255.0 standby 192.168.254.2 failover ------
sh failover
sh run failover
sh failover interface

Etherchennal - Find port where traffic goes

How to find the traffic pass through Etherchennal ? -------------------------------------------------------------------------------------------- STM-ACCESS-07A03-SW01#remote login switch STM-ACCESS-07A03-SW01-sp#test etherchannel load-balance interface po 42 ip 10.20.22.148 10.20.209.101 -------------------------------------------------------------------------------------------------------

F5 data center firewall aces performance

The F5 firewall came up aces, maxing out network capacity while also offering sophisticated filtering and attack protection capabilities. In some cases, traffic rates were higher with the firewall in place than without, probably because the F5 device managed server loading more efficiently

 

This is test post

 

Hi how are you………..

Please consider the environment before printing this e-mail Disclaimer: This  communication  is  for the exclusive use of the intended recipient(s) and  shall  not attach any liability on the originator or ITC Infotech India Ltd./its  Holding company/ its Subsidiaries/ its Group Companies. If you are the addressee, the contents of this e-mail are intended for your use only and it shall  not be forwarded to any third party, without first obtaining written authorization from the originator or ITC Infotech India Ltd./ its Holding company/its  Subsidiaries/ its Group Companies. It may contain information which is confidential and legally privileged and the same shall not be used or dealt with  by any  third  party  in  any manner whatsoever without the specific consent  of  ITC  Infotech India Ltd./ its Holding company/ its Subsidiaries/ its Group Companies.

MultiLink configuration

Multilink configuration

 

interface Multilink1

 ip address x.x.x.x x.x.x.x

 ip load-sharing per-packet

 ppp multilink

 ppp multilink group 1

!

interface Serial0/0/0

 description "First link"

 no ip address

 encapsulation ppp

 ppp multilink group 1

!

interface Serial0/0/1

 description "second link"

 no ip address

 encapsulation ppp

 ppp multilink group 1

!

ip classless

ip route 0.0.0.0 0.0.0.0 Multilink1